8
11. Once the program has finished, the display will go out (except the power button)
and the fan will operate for 20 seconds. After 20 seconds, your Cyclo Chef Multi Air
Cooker will beep 5 times and then switch off.
12. Open the lid. Beware of any escaping steam and hot air.
•
We recommend you wear oven gloves.
•
The program can be paused at any time by opening the lid. Close the lid to resume the
program.
•
To stop the program, press the power button (
). The program will stop and the fan
will continue to run for 20 seconds. Any program settings will be lost.
ROTISSERIE ATTACHMENT
The rotisserie attachment slowly turns the food under the heating element to give even
cooking perfect for larger joints of meat and whole chickens.
1. Slide one of the rotisserie forks onto the spindle and tighten the screw. Skewer the
meat onto the spindle then slide on the other fork as shown (fig. H). Tighten the screw
on the fork to hold the meat.
2. Insert the drive shaft end of the spindle into the opening in the
bowl (fig. J)
3. Lower the other end of the spindle onto the support bracket
inside the bowl (fig. K).
4. Plug in your Cyclo Chef Multi Air Cooker. The unit will beep and
the display will light up briefly.
5. Tap the power button ( ).
6. The display will light up showing the available programs.
7. Tap the rotisserie button ( ) to select the rotisserie program.
8. The display will alternate between showing the default grill temperature
and the program run time (see DISPLAY). You can change either of these
settings (see PROGRAM GUIDE).
9. Change the settings as desired or accept the defaults.
10. Tap the power button ( ) to start the program.
11. Once the program has finished, the display will go out (except the power button)
and the fan will operate for 20 seconds. After 20 seconds, your Cyclo Chef Multi Air
Cooker will beep 5 times and then switch off.
12. Open the lid. Beware of any escaping steam and hot air.
- You can use the tongs to carefully remove the food. We recommend you wear oven
gloves.
- The program can be paused at any time by opening the lid. Close the lid to resume the
program.
- To stop the program, press the power button ( ). The program will stop and the fan
will continue to run for 20 seconds. Any program settings will be lost.
4
H
J
K
L
M
N
P
4
H
J
K
L
M
N
P
