Geokon 8002-4-1 страница 7 Скачать руководство пользователя

Страница: 7 / 64

1. INTRODUCTION

Model 8002-4, LC-2x4, 4-Channel Datalogger is a low cost, battery powered, easy to use

measurement instrument, designed to read up to four vibrating wire sensors equipped with

thermistors.

The 320K standard memory provides storage for 10666 data arrays. Each array consists of an

optional datalogger ID string (16 characters maximum), a timestamp consisting of the year, date

(Julian day or month/day format), time (hhmm or hours/minutes format) and seconds when the

reading was taken. Also included in the data is the internal 3V (or external 12V) battery voltage,

the datalogger temperature, the vibrating wire readings, the transducer temperature and the Array

number.

Internal math is calculated using 32-bit floating point notation (IEEE). Math operations on the

instrument readings, such as application of zero readings, gage factors (or calibration factors)

and offsets when using a linear conversion technique or polynomial coefficients when using the

polynomial conversion, provide outputs directly in engineering units. The dataloggers internal

configuration is defined through communication with a computer using the supplied RS-232 or

USB (or optional RS-485) interface cable. The datalogger is configured and monitored using

LogView, a Geokon proprietary Graphic User Interface (GUI) software application (See Section

2.5). The datalogger can also be configured and monitored via text-based commands with any

standard terminal emulator software, such as Microsoft Windows HyperTerminal

™

(see Section

3).

The communication method for each model of the LC-2x4 is described below

8002-4-1:

Communication with the LC-2x4 is implemented via the host computer’s RS-232

COM port. See Section 2.5.6 for further information.

8002-4-2:

Communication with the LC-2x4 is implemented via the host computer’s USB 2.0

port. When connected to a computer via the USB port, the LC-2x4 appears to the

computer as a “virtual” COM port. The LC-2x4 datalogger also receives all of its

operating power from the computer, thus extending the internal 3V (or external

12V) battery life. When disconnected from the USB port, the datalogger

automatically switches to the internal 3V (or external 12V) battery pack. See

Section 2.5.7 for further information.

8002-4-3:

Communication with the LC-2x4 is implemented via RS-485. This allows for

long communication cables (up to 4000’) between the host computer and the LC-

2x4. The ability to network two or more LC-2x4 dataloggers together is also

available with this communication option. See Section 2.5.8 and Appendix F

Networking for further information.

All data, both readings and configuration, are stored in non-volatile EEPROM with a typical

storage life of 10 years (minimum). The internal temperature compensated real-time clock, used

to provide timekeeping and triggering of readings, is accurate to approximately two minutes per

year. The comma delineated ASCII output format allows for easy importing into popular

spreadsheet programs such as Lotus 1-2-3 or Microsoft Excel. See Appendix D for sample data

files.

Содержание 8002-4-1

































































Результаты поиска

Содержание 8002-4-1

Отзывы:

Похожие инструкции для 8002-4-1

Бренды по названию

Популярные бренды

Geokon 8002-4-1, Инструкция по эксплуатации

Результаты поиска

Содержание 8002-4-1

Отзывы:

Похожие инструкции для 8002-4-1

Бренды по названию

Популярные бренды