genz GC48V-040LFP-2RU, Руководство по эксплуатации продукта

Страница: 7 / 25

LFP Battery Module – Product Manual
All rights reserved genZ 2020
Issued for Use Revision Page
4/03/2020 2.1 7 of 25
6 Installation
Failure to follow these guidelines will void the limited warranty and cause potential
damage to property or serious injury.
6.1 Receiving Information
Once you receive the product it should be visually inspected for damage that may have occurred
during shipping. Immediately notify the carrier and place of purchase if any damage is observed. The
packing materials that the product was shipped with has been designed to minimize any shipping
damage. In the unlikely event that the product needs to be returned to the manufacturer, use the
original packing material. Since the manufacturer is not responsible for shipping damage incurred
when the product is returned, the original packing material is inexpensive insurance.
6.2 Installation Placement
The Battery Module must be installed such that it is not exposed to:

Sources of heat or where the ambient temperature is expected to regularly exceed 55°C.

Extreme cold where the ambient temperature is expected to regularly fall below -10°C.

Direct sunlight.

Rain, water, salt laden air or where the humidity is likely to cause condensation.

A corrosive atmosphere.
Select a location, which will provide good air circulation for the Battery Module at all times. Route
cables so they cannot be walked on or damaged.
Refer to the specifications for specific operating parameters.
6.3 Installation of Battery Module(s)
Be sure to read the installation placement and associated cautions before installing the Battery
Module. Place the Battery Module in the final desired location and complete the rest of the
installation procedure.
These battery modules can be used in any orientation provided consideration is given to protecting
the circuit breaker, connector and indicator lamp from damage.
6.4 Charger
A charger specifically designed for charging LFP’s must be used or the use of a charger that has
configurable/programmable charging characteristics such that it meets the required profiles as
detailed in this manual. If in doubt, please contact the provider of this battery module or contact genZ
technical department for further guidance.