Genvex Optima 310 DESIGN, Руководство пользователя

Страница: 9 / 28

9
Optima 310
March = 3,
April = 4,
May = 5,
June = 6,
July = 7,
August = 8,
September = 9,
October = 10,
November = 11,
December = 12.
• 06 Year.
The current year can be entered here.
Calendar
Use this function to configure and change each day
setting for the week. Each day can be configured to run
with different ventilation speeds as required. It is possible
to copy the configuration from one day to another. It
is possible to press ON or OFF here, i.e. if there is
a time when there are no people in the building, the
daily settings can be turned off and the device will run
according to the manual settings, e.g. level 1.
This menu is divided into 9 menu items:
• 01
Use this to choose between controlling the
device manually or control the speed (air
exchange) and temperature automatically
according to a fixed day program. If the
menu item is set to OFF, the device will be
controlled manually according to the speed
and temperature selected. If the menu item is
set to ON, the device will controlled according
to the day programs entered in the menu
items 02 to 08.
• 02
Monday. Up to 10 change times can be
entered for one day. The times can be entered
in random sequence. Enter the hours in the
first column. Enter the minutes in the second
column. Enter the speed in the third column
S. Use the fourth column to enter the
temperature difference to which the
temperature should be lowered. Example:
If the temperature is set to 21ºC and you then
enter – 2.0º, the device will aim at 19ºC. If the
speed has been changed manually on the
button under daily operation, the program will
revert to the day program at the next change-
time point is passed.
Examples of a day program:
01 07:30 H3 -0.0
02 09:15 H1 -1.0
03 17:00 H3 -0.0
04 18:00 H2 -0.0
05 23:30 H2 -2.0
It is not necessary to use all change-times if the line
only reads 0, it will be skipped by the control system.
03 to -08. These days can be filled in •
individually in the same way as under item 02.
• 09 Copy day. Use this menu item to copy
one day to another, where the same change-
times, speeds and temperature lowering are
required. For example: From Thursday to
Tuesday.
User menu
Use this function to configure and change the following
sub-items:
Item 1: Temperature
Configure the required temperature between 10°C and
30°C in order to change the ventilation temperature. It is
a precondition that a suitable after-heat surface is fitted
to the device. Use bypass to configure the ventilation
temperature to between 2°C and 30°C. (The room sensor
is mounted in the control panel).
Item 2: Service water
It is possible to configure the temperature to which
the heat pump shall heat the service water. It can be
configured between 0°C and 55°C. The default setting is
52°C.