Genvex Optima 310 DESIGN, Руководство пользователя

Страница: 3 / 28

3
Optima 310
1. Control panel
The control panel must be mounted on a wall that is
centrally located in the home.
Since the control panel functions as a room thermostat, it
is important to observe the following:
• Do not expose to direct sunlight,
• Do not place on an outer wall,
• Do not build it into the wall,
• Do not place over a heat source.
A lamp close to the control panel can affect the light
sensor so that it will not regulate the light intensity as
intended.
There are 7 buttons in the ring on the front of the control
panel that are used to operate the panel. The function of
the buttons changes depending on the menu selected.
(More information is available under Operating)
There is an infrared movement sensor located under the
glass screen. You can use this to bring up the menu for
daily control options simply by moving your hand past the
control panel.
(This function can be turned off: See under Main menu/
Display/Menu item 5)
The following are located on the bottom of the control
panel:
1: SD card
2: Room sensor
3: Light sensor
4: Mini USB- socket for connection to computer
1: The SD-card, which can be removed, contains all
the control models and versions that make the control
panel compatible with older versions. The SD-card also
contains all the languages, menus, help texts, symbols
and collected data logs. During the start-up procedure,
the current versions are installed on the control panel
so that the controls can function without the SD-card.
However, the help texts will not appear on the screen and
the data logs will not be saved.
4: In order for a computer to read the data logs, it must
have the Genvex data logger program installed.