3
ABOUT THE PRODUCT
Transportation and Storage
As a rule, the unit should be stored packaged in an upright
position and without water. Transported with care and over
short distances, the unit may be tilted to up to 45 °C.
Transportation and storage may take place at temperatures
between -20 and +70 °C.
Transportation with a Forklift Truck
When the heat pump is transported with a forklift truck, it
must be placed on the provided base mount. Lifting must be
conducted slowly. As the unit has a high centre of gravity,
the unit must be secured so as not to topple during trans-
portation.
Transportation with a Sack Trolley
Secure the unit against slipping on the sack trolley. Do not
use water pipe connections, etc. for transportation purpos-
es. Make sure that the sack trolley does not damage the
cabinet and the connectors.
Unloading
To prevent damage, offload the unit onto a level surface.
Directions/Safety Instructions
• The construction of the unit conforms to all EU regula-
tions (see also the CE certificate).
• Take measures against fire during maintenance work that
has to do with opening the coolant circuit, in particular,
when the work involves fire (soldering, welding, etc.)
• Before starting work on the unit, remember to always dis-
connect all electrical connections.
• When connecting the unit, observe all applicable laws and
regulations.
• The water used must be potable grade. A reduction
valve should be installed if the water pressure is high.
• All connections for potable water must be certified.
Note: Work should only be done by a certified contractor.
Product Description
Use
The Combi 185 is a combined ventilation unit and domes-
tic water heat pump which can be used for:
• Heating hot domestic water;
• Ventilating a dwelling;
• Supplementing the heating of the dwelling with heated
supply air when the heat pump is not busy producing
domestic hot water.
Description
The Combi 185 is a ready-to-connect unit whose most
important components are: cabinet, tank, coolant, atmos-
phere and water circulation components as well as a
control unit and regulating and monitoring unit. The unit
can be connected to an internal heat exchanger with an
area of 0.8 m2 which allows connection to an external
boiler, a solar heating system, etc. In the heat pump, the
Combi 185 utilises the residual heat in the extract air to
either heat the supply air or to produce domestic hot
water.
The Combi 185 Unit can heat domestic water
corresponding to a family's hot water needs all year
round. The used and cooled air is expelled outside via the
discharge duct.
The tank has a built-in immersion stem which makes it
possible to regulate temperature in the tank by sensors
placed at the bottom and in the middle of the tank. The
Combi 185 has an electric heating element installed in the
tank which acts as a backup.
