GENUINE HOOLIGAN 170i, Руководство по обслуживанию

Страница: 59 / 146

Check & Adjust -3
3-18 V-belt - air sponge cleaning
1. Demolition -
> Remove of clamp bolt (1) Loosen.
> Remove the breather pipe ( 2).
> Remove to remove the fixed plate (3).
> Remove the sponge (4).
2. Checks -
> sponge is excessively dirty – replacement.
3. Cleaning -
> Using powerful compressed air to clean the.
Note:
Do not use flammable solvents to clean (eg: petrol) sponge.
4. Installation:
> Installed in accordance with the demolition order reverse.
3-19 Fuse check
Note:
Removable fuse
，
the main switch cut to the OFF position.
Check:
> Tools: multimeter
Way: red probe(+) then fuse either end
black Probe(-) connected to the other end of
> Multimeter stalls: Ω
∞ → replace a Fuse
Note:
. Lock cut the power to the OFF position.
. Please replace the fuse of the same amperage.
. Replacement again blown fuses, check Denso line.
Installation:
Installed in accordance with the demolition order reverse.
Warning-
Do not replace the fuse greater than originally set specifications, may cause the vehicle fire.
2 3 4 1
59