GENUINE HOOLIGAN 170i, Руководство по обслуживанию

Страница: 54 / 146

Check & Adjust -3
3-11 Valve clearance check / adjustment
1. Remove - order
> Please refer to chapter 7 cylinder head.
Note
.1). Valve clearance adjustment, measurement adjustments in the cold when.
.2) Measurement and adjustment, go to your piston top dead center position.
2.Measurement - valve clearance
> Tools: feeler
> Valve clearance: IN: 0.08mm
EX: 0.08mm
> Check the way:
a: Rotate the crankshaft to adjust the piston top dead point (the flywheels T points aligned
▽
).
b: Use a feeler gauge to measure inlet and exhaust valve clearance is within the specified range.
= 0.08mm feeler = IN / EX: can be placed in non-home = 0.10mm
Out of range → adjustment
3. Adjustment -
> Tools: Valve adjustment tool
> Adjust the way:
a: loosening the lock nut.
b: thickness gauge is inserted between the valve and the
adjustment screw.
c: Shun or counterclockwise rotation adjustment screw, straight
To be adjusted to a predetermined value so far.
d: re-measure the valve clearance, if the valve clearance beyond
Standardized, re-adjust.
Torque:
Adjustment bolts: 0.7kg-m
4. Installation:
> Reverse installed in accordance with removing the sequential manner.
54