GENUINE HOOLIGAN 170i, Руководство по обслуживанию

Страница: 137 / 146

Denso unit -7
7-4 Lamps lighting system
7-4.1- Bulb check
Check - filament whether disconnection
Measurement:
> Tools: Three multimeter stalls: Ω x1
Method: Three multimeter measuring rod connected to the
three-pin bulb
∞ → replace
Measurement: (Figure 13-2)
> Tools: 12V battery stalls: DC 20V
Way: using the battery connection bulbs pin
Bulb does not light → Replace
◎
Measurement Method: (check for all lamps)
Note
.1. The bulbs just remove the very high temperatures are
not directly handling them.
.2. The bulbs surface is not contaminated with oil or touch
the cited to lamp life and brightness. Dirty, use alcohol
Wipe clean.
Light switches and line checks
7-4.2 Stop light switch
Measurement:
Tools: multimeter stalls: DC 20V
Check the order:
1.Check bulb filament burns out.
2.Measured starting safety switch orange 12V.
3.ON: measured starting safety switch light blue 12V
whether.
.
(
—
)
(
＋
)
HI
(
＋
)LO
137