Gentex TBH IIIA Series, Руководство оператора

Страница: 22 / 40

18
MAINTENANCE
REPLACING SUSPENSION (PAD/LINER) — 360
°
LINER
COMFORT PADS ONLY:
REMOVE THE EXISTING PADS.
Note the comfort pad position, orientation, and thickness.
INSTALL THE REPLACEMENT PADS.
Select the same pad thickness as previously installed.
Install the replacement pads in the helmet in the same manner in which the previous pads were
installed. If the wearer uses a headset, space the crown pads to accommodate the headband of
the headset.
Don the helmet, and check the fit in accordance with
Page 11 and Page 12. Make any
necessary adjustments.
LINER WITH PADS:
REMOVE THE LINER.
Pull the liner out from the rear of the helmet.
INSTALL THE REPLACEMENT LINER.
Align the replacement liner along the front edge of the helmet shell while applying pressure to ensure
that the Velcro securely attaches. Then guide the crown and the rear of the liner into the helmet shell,
continuing to apply pressure. Confirm that the liner is properly aligned; adjust further if necessary.
1
1
2
2
Remove and
install pads
Remove
liner
Align
liner front Align
liner crown
and rear Confirm
alignment