Gentex TBH IIIA Series, Руководство оператора

Страница: 14 / 40

10
HELMET PREPARATION
CHECK THE OVERALL HELMET FIT
Ensure that the helmet fit is snug and secure, yet comfortable. If the helmet is too tight, have the
wearer remove the helmet, adjust the bottom pads as follows:
• Remove the bottom pads from the helmet as needed, noting their position inside the helmet.
• Remove one or both ¼ -inch-thick foam pads from the pad cover.
• Reinstall the bottom pads (with at least the ½ -inch-thick foam pad inside each
one) in the helmet in the same positions from which they were removed. Ensure that
the opening in each pad cover faces the hook fasteners inside the helmet.
•
Have the wearer don the helmet again. Recheck the fit.
PROCEED TO ADJUSTING RETENTION (CHIN STRAP) — PAGE 12.
3
4
ADJUSTABLE PADS
¼
inch thick
foam pads
Pad cover
Opening
½
inch thick
foam pad
BOTTOM PAD DETAIL
Bottom
Bottom
Bottom
Bottom
Bottom
Bottom