GENIV G4-RTAHD Series, Руководство пользователя

Страница: 9 / 21

Please refer to the following table for Alarm/RS-485 Connection Block information.
Connection Label Description
1 – 16 Positive input lead from external alarm device.
Device common ground.
NO1/C1 – NO5/C5 Normally open alarm output ports 1 through 5.
NC5 Normally closed alarm output port.
CTRL 12V 12 Volt power output for external alarm device.
+12V
External power input port for alarms. Power supplied should be less than 1
Amp.
A/B
RS-485 communication connection for PTZ control, A is positive and B is
negative.
Overview of Navigation and Controls
Before initial operation, please ensure that you have properly installed the HDD(s) and all cable
connections.
Login, Logout & Main Menu
Login
After the DVR boots up, the default video display is in multiple-window live display mode. Press
Enter or left click the mouse to bring up the login interface.
By default, the DVR has four accounts:
Username: admin Password: admin (administrator, local and network)
Username: 888888 Password: 888888 (administrator, local only)
Username: 666666 Passwords: 666666 (Unprivileged user who can only monitor, playback,
backup and etc.)
Username: default Password: default (hidden user)
You can use a USB mouse, front panel or remote control to input. When using the mouse input
method, left click the button to switch between numeric, upper case, lower case and special
characters.
Note: For security reason, please modify password after you first login.
Three account login failures within 30 minutes will result in a system alarm and five account login
failures within 30 minutes will result in an account lock. Unlocking an account requires a system
reboot.