GENIV G4-RTAHD Series, Руководство пользователя

Страница: 18 / 21

Pan/Tilt/Zoom
Please note the following regarding pan/tilt/zoom (PTZ) setup and operation:
Slight differences may be found in the user interface, due to various protocols.
RS-485 cables must be connected to the “A” (positive) and “B” (negative) ports of the alarm
block in order to have PTZ control.
Configuration information should be configured on the PTZ prior to configuring your DVR.
In order to control a PTZ with the DVR, switch the camera monitor channel to full screen mode
for the appropriate window.
PTZ setup
The PTZ setup includes the following items. Please select channel first.
Protocol: Select corresponding PTZ protocol such as PELCOD.
Address: Input corresponding PTZ address.
Baud rate: Select the baud rate.
Data bit: Select the number of data bits. Default value is 8.
Stop bit: Select the number of stop bits. Default value is 1.
Parity: Select the parity. There are three choices: none/odd/even. Default value is none.
After configuring all items click the Save button. You will be returned to the previous menu.
PTZ operation
In single window display mode right click the mouse, click the “Fn” Button on the front panel or
click the “Fn” key on the remote control to open the menu.
Click Pan/Tilt/Zoom, the interface is shown as below. Here you can set the following items: