background image

 

7

 

 

3.1.2

 

Storage instructions for storage without hazardous content 

PyroBubbles® must be stored in a dry location.

 

The transport container must be stored protected from direct sunlight, to prevent ageing of 
the plastic material. The recommended storage temperature range is +15°C to +30°C.

 

 

3.1.3

 

Storage instructions for the storage of cells and batteries 

When storing cells and batteries, the lid of the container must be kept free, so that any reaction 
gases that may develop can escape and a resulting pressure build-up inside the transport con-
tainer is avoided.

 

3.2

 

Transport 

3.2.1

 

Safety instructions 

 

Danger

 

Danger of poisoning due to toxic, partially odourless gases

 

Injuries ranging from severe to fatal

 

In the event that the cells or batteries suffer a thermal runaway, leave the haz-
ardous area as quickly as possible.

 

 

Danger

 

Danger of explosion due to explosive gases

 

Injuries ranging from severe to fatal

 

In the event that the cells or batteries suffer a thermal runaway, avoid ignition 
sources. If possible, provide sufficient ventilation.

 

3.2.2

 

Transport instructions 

During transport, observe the relevant legal regulations.  This also applies for any additional 
markings or labels.

 

Make sure that the transport containers are securely closed by means of the belt fasteners.

 

Lift the transport container only by means of the lifting harness provided.

 

When transporting dangerous goods, the space above the transport container must be kept 
free, so that in the event of a thermal runaway the reaction gases have adequate space to 
vent.

 

 

 

Содержание LioGuard S-Box 1 Basic

















Отзывы: