10
3.4.4
Workflow
1.
Open the transport container (see section
Fehler! Verweis-
quelle konnte nicht gefunden werden.
).
2.
At Basic: Remove all PE filler pads from the transport con-
tainer. Depending on the model, next insert the PE filler pads
flat out into the transport container up to the minimum
height recommended in point 3.4.3.
2.
At Advanced: Enter an evenly distributed layer of PyroBub-
bles® with a minimum filling height of 1
cm above the grid
floor.
2.
At Premium: Remove all PE filler pads from the transport con-
tainer. Depending on the model, you can then place the PE
filling pads flat in the transport container up to the minimum
height recommended in point 3.4.3.
3.
Place the hazardous substance in such a way that the recom-
mended minimum distances are guaranteed. When loading
multiple batteries, there must also be a sufficient all-round
safety distance between the batteries.
SSsSsssed
