Genius Scanner
14
3. Place the film holder on the scanner glass, and align the positioning aids of the film holder to
fit into the indentations at the upper right-hand or left-hand corner of the scanner glass.
Ensure that the ready-to-be-scanned film compartment must be positioned on the center of
the scanner glass, and the arrow sign of the particular film compartment must be in alignment
with the inverse-arrow sign carved on the scanner housing.
a. b.
c. d.
Note:
If you are scanning 35mm slides, place the film holder on the scanner first,
and then place the slides in the holder.
4. Select POSITIVE FILM or NEGATIVE FILM as the scan source by clicking the SCAN
SOURCE button on the Genius TWAIN window.
5. Select
35mm
,
120/220 (6x6 cm) film
, or
120/220 (6x9 cm) film
as the scan size.
6. Click on the PREVIEW IMAGE icon to preview the image.
7. Adjust the scanning border, if necessary.
8. Click on the SCAN IMAGE icon to start scanning the image.
Important Notes about Scanning Film
!
Do not cover any small compartment below each arrow sign on the film holder because that it
is necessary for calibration.
!
Always replace the reflective document mat onto the scanner’s document cover after you
finish scanning the films.
Attention
