Genius Scanner
8
If the scanner installation is not started and displayed automatically
on the screen, click START, select RUN and type in “d:install”
(where d: is the drive letter assigned to the CD-ROM drive of your
computer)
Software Setup Troubleshooting
Carefully review the steps outlined in this guide and the Quick Installation Guide that accompanied
your scanner.
If you are still having problems, please check that:
•
You have 250MB of free space on your hard disk drive.
•
The scanner is plugged in and has power.
•
You are using the USB cable supplied with the scanner.
•
The square end of the USB cable is plugged into the rear of the scanner.
•
The rectangular end of the USB cable is plugged into the back of your computer.
If you deviated from the installation procedures defined in this manual, please unplug the USB
cable from the scanner and reinstall the software from the CD-ROM. To reinstall your scanner’s
software, click START, RUN, then type D:\Install (where D represents the letter of your CD-ROM
drive). Carefully follow all the installation instructions presented in the Setup Wizard. Reboot your
computer when prompted, and plug the USB cable back into the scanner while your computer is
still turned on.
If you still need support, you can contact Genius at any office listed on the last page of this guide
during normal business hours in that area.
Installing Additional Software
Your scanner is TWAIN compliant and functions with virtually all available TWAIN compatible
program. If you purchase additional program to be used with your scanner, please make sure that
it conforms to the TWAIN standard.
Uninstalling the Scanner
Windows XP/Me/2000/98 provides an Uninstall Wizard for uninstalling your scanner software
driver and application programs:
Uninstall from the “Start Menu” (Uninstall Wizard)
Attention
