Genie Z-45J, Руководство оператора

Страница: 63 / 74

Fifth Edit
ion • First Printing
Operator's Manual
Operating Instructions
Part No. 1297032GT Z
®
-
45J DC • Z
®
-45J Bi-Energy 61
Battery and Charger Instructions
Observe and Obey:

Do not use an external charger or booster
battery.

Charge the battery in a well-ventilated area.

Use proper AC input voltage for charging as
indicated on the charger.

Use only a Genie authorized battery and
charger.

Do not operate the machine with the battery
charger plugged in.
Charging the Batteries
Use the engine (if equipped) or the AC battery
charger to recharge the batteries.
Bi-Energy models: Charging the Batteries
with the Engine
Running the engine will automatically charge the
batteries. At high idle, the engine supplies enough
power for charging and for machine functions. At
low idle, machine functions will use battery power.
All lift and drive functions can be operated while
the engine is running.
The battery charge indicator will reset when the
engine has been turned off for 2-3 minutes.
Charging the batteries with the engine does not
fully charge the batteries. Periodically, use the AC
battery charger to fully charge the batteries.
Charging the Batteries with the AC
Charger
1 Be sure the batteries are connected before
charging the batteries.
2 Open the battery compartment. The
compartment should remain open for the
entire charging cycle.
Maintenance-free batteries
1 Connect the battery charger to a grounded AC
circuit.
2 The charger will indicate when the battery is
fully charged.