![background image](http://html1.mh-extra.com/html/genie/tmz-34-19/tmz-34-19_service-manual_2211929012.webp)
REV C
Section 2 • Specifications
June 2005
2 - 2
TMZ-34/19
Part No. 52075
Hydraulic Specifications
Hydraulic Oil Specifications
From serial number T3498-001 to T3402-375
Hydraulic oil type
Shell Donax TG (Dexron III)
After serial number T3402-375
Hydraulic oil type
Chevron Rykon MV equivalent
Approximate SAE grade
5W-20
Viscosity index rating
200
Chevron Rykon MV oil is fully compatible and
mixable with Shell Donax TG (Dexron III) oils.
Genie specifications require hydraulic oils which are
designed to give maximum protection to hydraulic
systems, have the ability to perform over a wide
temperature range, and have a minimum viscosity index
rating of 150. They should provide excellent antiwear,
oxidation, corrosion inhibition, seal conditioning, and
foam and aeration suppression properties.
Optional fluids
Biodegradable
Petro Canada Premium ECO 46
Statoil Hydra Way Bio Pa 32
BP Biohyd SE-S
Fire resistant
UCON Hydrolube HP-5046
Quintolubric 822
Mineral based
Shell Tellus T32
Shell Tellus T46
Chevron Aviation A
Use Chevron Aviation A hydraulic
oil when in ambient temperatures
consistently below 0°F / -17°C.
Use Shell Tellus T46 hydraulic oil
when oil temperatures consistently
exceed 205°F / 96°C.
Genie specifications require
additional equipment and special
installation instructions for the
approved optional fluids. Consult
the Genie Industries Service
Department before use.
Hydraulic power unit
Pump type:
Gear
Displacement
0.057 cu in
per revolution
0.93 cc
Flow rate @ 3000 psi / 207 bar
1.5 gpm
5.7 L/min
System relief valve pressure
3200 psi
220.6 bar
Hydraulic tank
10 micron with
return filter
18 psi / 1.2 bar bypass
Turntable rotate manifold
Relief valve pressure
1200 psi
82.7 bar
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.
SPECIFICATIONS
800-610-4101
ActionRental.com