Document 57.0005.8200 - 12/2005
Handler with telescopic boom
GTH-6622
Page
C-6
OPERATING INSTRUCTIONS
■
C-2.5
ADJUSTING THE REAR VIEW MIRRORS
The machine is fitted with two rear view mirrors:
•
The right rear view mirror is located on a special
supporting bracket in advanced position and allows
checking the area behind the machine, on the right-
hand side. To adjust its position, manually rotate
the joint it is fitted with.
•
The left rear view mirror is placed on the left upper
post of the windscreen and allows checking the
area behind the machine, on the left- hand side.
To adjust its position, manually rotate the joint it is
fitted with.
■
C-2.4
ADJUSTING THE STEERING COLUMN
Both steering column and dashboard can be set to a
different angle. For this purpose:
•
Loosen lever
1
and adjust as required, then re-
tighten lever
1
.
DANGER
Before driving the machine, ensure the steering
wheel is perfectly clamped.
���
■
C-2.6 SWITCHING ON THE CAB LIGHTS
The ceiling light fixture of the cab has an internal lamp
and a courtesy lamp.
To switch on the cab interior lights:
•
Switch
4
in pos.
A
cab interior lights OFF
•
Switch
4
in pos.
B
cab interior lights ON.
•
Switch
4
in pos.
C
courtesy lamp ON
���
���
Содержание GTH-6622
Страница 8: ...Document 57 0005 8200 12 2005 Page 4 Handler with telescopic boom GTH 6622 Intentionally blank page...
Страница 34: ...Document 57 0005 8200 12 2005 Handler with telescopic boom GTH 6622 Page B 8 SAFETY Intentionally blank page...
Страница 96: ...Document 57 0005 8200 12 2005 Handler with telescopic boom GTH 6622 Page E 4 FAULTS AND TROUBLESHOOTING NOTES...
