Genie GTH-6622, Руководство оператора

Страница: 39 / 124

Document 57.0005.8200 - 12/2005
Handler with telescopic boom GTH-6622
Page
C-5
OPERATING INSTRUCTIONS
■
C-2.2 ADJUSTING THE SEAT
A correct adjustment of the seat ensures the operator
a safe and comfortable driving. The handler seat is
fitted with devices which allow for the adjustment of
the springing, the height and the distance from the
controls.
• Seat distance from the controls
The seat is equipped with an adjusting device to
slide the same seat forward or back with respect
to the steering column.
To adjust the seat, pull lever
1 outwards and push
the seat to the desired direction. Then release the
lever and make sure that the seat locks in position.
• Springing adjustment (optional)
Rotate lever 2 clockwise or anticlockwise
according to the springing degree required. Rotate
clockwise/ anticlockwise to increase/reduce the
seat springing. To reverse this control, pull out and
rotate the lever knob by 180°.
• Height adjustment (optional)
Turn knob 3 clockwise to lift the seat; turn it
counter-clockwise to lower the seat.
In some seats height can be adjusted to three
different positions. Lift the seat until you hear the
click signalling that the seat is locked in position.
To lower the seat, raise to end of stroke to release
the mechanism, then release the seat: it will return
to the bottom position.
■
C-2.3 FASTENING THE SEAT BELTS
Sit correctly in the driving seat; then:
• The safety belts are equipped with reel retractor.
To fasten the belt, pull tab
1 and push it into buckle
2 .
• To release the belt, push button 3 and remove the
tab from the buckle.
• Make sure that the buckle is correctly located at
the hip point and not on the stomach.
• Operate the end adjusters to reach the length you
wish and make sure the buckle is always in the
middle.
���
���
���
���
���
���