Operator's Manual
Fourth Edition • Third Printing
Part No. 1000033
GS-2032 • GS-2632
25
Error indicator readout
If the LED diagnostic readout
displays an error code, such as LL,
push in and pull out the red
Emergency Stop button to reset the
system.
To Extend and Retract Platform
1 Step on the platform extension release pedal on
the platform toeboard.
2 Grasp the platform guard rails and carefully push
to extend the platform to the mid-position stop.
3 Step on the release pedal again and push to
fully extend the platform.
Do not stand on the platform extension while trying
to extend it.
4 Step on the platform extension release pedal
and pull to retract the platform to the mid-
position stop. Step again to fully retract the
platform.
Operation From Ground with
Controller
Maintain safe distances between the operator,
machine and fixed objects.
Be aware of the direction the machine will travel
when using the controller.
Battery Level Indicator
Use the LED diagnostic readout to determine the
battery level.
Fall Protection
Personal fall protection equipment (PFPE) is not
required when operating this machine. If PFPE is
required by job site or employer rules, the following
shall apply:
All PFPE must comply with applicable
governmental regulations and must be inspected
and used in accordance with the manufacturer’s
instructions.
After Each Use
1 Select a safe parking location—firm level
surface, clear of obstruction and traffic.
2 Lower the platform.
3 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
4 Chock the wheels.
5 Charge the batteries.
How to use the Safety Arm
1 Raise the platform approximately 2.4 m from
the ground.
2 Rotate the safety arm away from the machine
and let it hang down.
3 Lower the platform until the safety arm rests
securely on the link. Keep clear of the safety
arm when lowering the platform.
OPERATING INSTRUCTIONS
Full Low