Operator's Manual
Fourth Edition • Third Printing
28
GS-2032 • GS-2632
Part No. 1000033
Observe and Obey:
Only qualified riggers should rig and lift the
machine.
Be sure the crane capacity, loading surfaces
and straps or lines are sufficient to withstand
the machine weight. See the serial plate for the
machine weight.
Lifting Instructions
Fully lower the platform. Be sure the extension
deck, controls and component trays are secure.
Remove all loose items on the machine.
Determine the center of gravity of your machine
using the table and the picture on this page.
Attach the rigging only to the designated lifting
points on the machine. There are two 1 inch /
2.5 cm holes on the front of the machine and two
holes in the ladder for lifting.
Adjust the rigging to prevent damage to the
machine and to keep the machine level.
Y Axis
X Axis
Center of gravity
X Axis
Y Axis
ANSI and CSA models
GS-2032
35.6 in
22.2 in
90.5 cm
56.5 cm
GS-2632
31.7 in
22.7 in
80.6 cm
57.6 cm
Australia models
GS-2032
31.9 in
21.2 in
80.9 cm
53.9 cm
GS-2632
32.4 in
23.3 in
82.2 cm
59.3 cm
TRANSPORT AND LIFTING INSTRUCTIONS