Genie GS-2632 Скачать руководство пользователя страница 25

Страница: 25 / 37

Operator's Manual

Fourth Edition • Third Printing

Part No. 1000033

GS-2032 • GS-2632

OPERATING INSTRUCTIONS

To Position Platform

1 Press the lift function select

button.

2 Press and hold the function

enable switch on the control handle.

3 Move the control handle according to the

markings on the control panel.

To Steer

1 Press the drive function select button.

2 Press and hold the function enable switch on

the control handle.

3 Turn the steer wheels with the thumb rocker

switch located on the top of the control handle.

To Drive

1 Press the drive function select

button.

2 Press and hold the function

enable switch on the control handle.

3 Increase speed: Slowly move the control handle

off center.

Decrease speed: Slowly move the control

handle toward center.

Stop: Return the control handle to center or

release the function enable switch.

Use the color-coded direction arrows on the
platform controls and on the platform to identify the
direction the machine will travel.

Machine travel speed is restricted when the
platform is raised.

Battery condition will affect machine performance.
Machine drive speed and function speed will drop
when battery level indicator is flashing.

Emergency Stop

Push in the red Emergency Stop button to the off
position at the ground controls or the platform
controls to stop all functions.

Repair any function that operates when either red
Emergency Stop button is pushed in.

Auxiliary Lowering

1 Pull the auxiliary lowering knob.

Operation From Ground

1 Turn the key switch to ground control.

2 Pull out both ground and platform red

Emergency Stop buttons to the on position.

3 Be sure the battery pack is connected before

operating the machine.

To Position Platform

1 Move the up/down toggle switch according to

the markings on the control panel.

Drive and steer functions are not available from the
ground controls.

Operation From Platform

1 Turn the key switch to platform control.

2 Pull out the ground and platform red Emergency

Stop buttons to the on position.

3 Be sure the battery pack is connected before

operating the machine.

Содержание GS-2632






































Результаты поиска

Содержание GS-2632

Отзывы:

Похожие инструкции для GS-2632

Бренды по названию

Популярные бренды

Genie GS-2632, Руководство оператора с информацией по обслуживанию

Результаты поиска

Содержание GS-2632

Отзывы:

Похожие инструкции для GS-2632

Бренды по названию

Популярные бренды