Operator's Manual
Fourth Edition • Third Printing
Part No. 1000033
GS-2032 • GS-2632
35
SPECIFICATIONS
Model
GS-2632
Height, working maximum
32 ft
9.9 m
Height, platform maximum
26 ft
7.9 m
Height, stowed maximum
84
3
/
4
in
2.15 m
Height, stowed maximum
75
1
/
4
in
1.91 m
Rails folded
Platform height,
45
1
/
2
in
1.16 m
Stowed maximum
Height, guard rails -
39 in
99.1 cm
ANSI, CSA and Australia
Width
32 in
81.3 cm
Length, stowed
96
1
/
4
in
2.44 m
Length, platform extended
131
1
/
4
in
3.33 m
Maximum load capacity
500 lbs
227 kg
Maximum wind speed
Indoor only (AUS)
0 mph
0 m/s
Outdoor (ANSI)
28 mph
12.5 m/s
Wheelbase
73 in
1.85 m
Turning radius (outside)
83
1
/
2
in
2.12 m
Turning radius (inside)
0 in
0 cm
Ground clearance
3
1
/
2
in
8.9 cm
Ground clearance
3
/
4
in
1.9 cm
Pothole guards deployed
Weight
See Serial Label
(Machine weights vary with option configurations)
Power source
4 Batteries, 6V 225AH
Controls
Proportional
Platform dimensions
Length x width
89 in x 31
1
/
4
in
2.26 m x 79.4 cm
Platform extension length
39 in
99 cm
Continuous improvement of our products is a Genie policy.
Product specifications are subject to change without notice or obligation.
AC outlet in platform
standard
Maximum hydraulic pressure
3500 psi
241.3 bar
(functions)
System voltage
24V
Tires size
15 x 5 x 11
1
/
4
Airborne noise emissions
<70 dB
Maximum sound level at normal operating workstations
(A-weighted)
Maximum slope rating,
stowed position
30% (17°)
Maximum side slope rating,
stowed position
30% (17°)
Note: Slope rating is subject to ground conditions and
adequate traction.
Drive speeds
Stowed, maximum
2.2 mph
3.5 km/h
Platform raised, maximum
0.5 mph
0.8 km/h
40 ft/54.5 sec 12.2 m/54.5 sec
Floor loading information
Tire load, maximum
ANSI/CSA
1773 lbs
804 kg
AUS
1830 lbs
830 kg
Tire contact pressure
ANSI/CSA
177 psi 12.48 kg/cm
2
1223 kPA
AUS
182 psi 12.87 kg/cm
2
1262 kPA
Occupied floor pressure
ANSI/CSA
248 psf
1212 kg/m
2
11.89 kPA
AUS
243 psf
1187 kg/m
2
11.65 kPA
Note: Floor loading information is approximate and
does not incorporate different option
configurations. It should be used only with
adequate safety factors.
