Genie CB 1000, Руководство по эксплуатации и техническому обслуживанию

Страница: 17 / 24

17
WA R N I N G
s5SEEXTREMECAUTIONWHENWORKINGFROMALADDERORSTEPSTOOL
s7HENREPLACINGLIGHTCOVERMAKESUREWIRESARENOTPINCHEDOR
near moving parts.
Maintenance and Adjustments
6
REGULAR MAINTENANCE
(continued)
s 3CREWDRIVEMODELS6ERIFYSHUTTLERELEASELEVERISIN%.'!'%$
(UP) position (pull release handle toward opener and let go)
s #HAINBELTDRIVEMODELS6ERIFYBULLETISENGAGEDTOCARRIAGE
Pull/release cord down and back towards opener and let go.
– Operate door using a remote or wall console.
– Door will re-attach itself to carriage assembly.
CORRECTIVE MAINTENANCE
Changing Light Bulbs
1. Disconnect power to door opener.
s /PENPOWERHEADLIGHTCOVER
s 2EMOVELIGHTBULBS
s2EPLACELIGHTBULBS
– DO NOT use light bulbs with greater than 100 Watt rating,
PowerLift ® 900, GPower ™ 900 require light bulbs of no more
than 60 watts. Compact CFL's may also be used.
– Close powerhead light cover.
2. Reconnect power to door opener.
s 4ESTLIGHTOPERATION
Reset Open/Close Travel Limit
Performing all eleven (11) Limits/Force setting steps (see pages 6-8)
erases previous Limits/Force settings.
NOTE: The opener will not close the door automatically unless the
Safe-T-Beam ® System is installed and Limits are programmed.
Disengaging and Engaging Carriage/Bullet
Remote Battery Replacement
Replace remote battery with a CR 2032 coin cell battery.
1. Open remote case using a washer or coin that fits into the slot at
top of remote.
2. Replace battery.
3. Align components and snap case
closed.
(continued next page)
Engaged Engaged
Opener Opener
Disengaged Disengaged
Engaged Engaged
Opener Opener
Disengaged Disengaged
Screw Drive Screw Drive Belt/Chain Drive Belt/Chain Drive
Engaged Engaged
Opener Opener
Disengaged Disengaged
Engaged Engaged
Opener Opener
Disengaged Disengaged
Screw Drive Screw Drive Belt/Chain Drive Belt/Chain Drive
To engage bullet to carriage,
pull the release handle down and
toward the opener.
To disengage bullet from carriage,
pull relaese handle down and
toward the door.
To engage shuttle to carriage,
pull down and toward the opener.
To disengage shuttle from carriage,
pull down on relaese hanfle .