background image

16

 

 

 

 

Maintenance and Adjustments

6

If you have any questions, please do not hesitate to contact customer 
service at: 

1-800-35-GENIE

 or visit www.geniecompany.com

 

IMPORTANT SAFETY INSTRUCTIONS

REGULAR MAINTENANCE

Basic monthly maintenance tasks include:

s#ONTACT2EVERSE
s3AFE4"EAMš3YSTEM#HECK
s$OORBALANCE
s,UBRICATEDOORHARDWARE

A. Contact Reverse Test

 

See page 9

.

B. Safe-T-Beam

®

 (STB) System Check

Check that both the RED and GREEN LEDs are ON steady. This  
indicates the system is working properly. If both LEDs are not ON 
steady, check the appropriate items below:

 s34"RED,%$mASHES

    –  Check for obstruction.
  – 

 

Check 

alignment.

    – Verify wire routing from STBs to STB connection in powerhead
    – Check for signal interference from another Safe-T-Beam

®

 unit  

   (for 

multiple 

door 

installations).

 s.O34"REDORGREEN,%$DISPLAYED

    – Check wiring and wire connections.

If the system appears to be working properly, perform the check as 
follows:
  1. Start the door closing.
  2. Pass an object through the beam. The door should stop and  

 

    reverse to the fully open position.

C. Door Balance (Spring Tension)

Perform the check as follows:

 s7ITHTHEDOORCLOSEDPULLMANUALEMERGENCYRELEASEHANDLE 

    DOWN and let go to release door carriage assembly from drive   
  system.

 s2AISEANDLOWERTHEDOORMANUALLYˆITSHOULDMOVEFREELYAND

  smoothly.

 s2AISEDOORMANUALLYABOUTgTOgFEETANDLETGO

– Door should remain stationary or move very slowly.
    – If door moves quickly, CONTACT A TRAINED DOOR SYSTEM    
      TECHNICIAN to have your door springs serviced.

 s#LOSETHEDOOR

       

 

 

 

 

(continued next page)

     

WA R N I N G

TO REDUCE THE RISK OF SEVERE INJURY OR DEATH, READ 
AND FOLLOW ALL INSTRUCTIONS.

1. 

NEVER

 let children operate or play with the door controls.  

2. Keep remote away from children.
3. 

ALWAYS

 keep the moving door in sight and away from people  

  and objects until door is completely closed. NO ONE SHOULD  
  CROSS THE PATH OF THE MOVING DOOR.
4. 

NEVER

 GO UNDER A STOPPED, PARTIALLY OPEN DOOR. 

5. Test opener monthly. The door MUST reverse on contact with a  

 HIGHOBJECTORAXBOARDLAIDmAT ATTHECENTEROF

 

 DOORWAYONTHEmOOR!FTERADJUSTINGEITHERTHEFORCEORLIMITOF

 

  travel, retest door opener. Failure to adjust the opener properly  
  may cause severe injury or death.
6. When possible, use emergency release only when door is  
  closed. Use caution when using this release with the door open.  
  Weak or broken springs are capable of increasing the rate of  
  door closure and increasing the risk of severe injury or death. 
7. KEEP DOORS PROPERLY BALANCED. See your garage door  
  Owner’s Manual. An improperly balanced door increases the  
  risk of severe injury or death. Have a trained door system  
  technician make repairs to cables, spring assemblies, and  
 other 

hardware.

SAVE THESE INSTRUCTIONS

     

WA R N I N G

s 'ARAGEDOORHARDWARESPRINGSCABLESBRACKETSPULLEYSETC 

 

  are under extreme pressure and tension.

s

DO NOT

 attempt to repair or adjust door springs or any hardware,  

 and 

DO NOT OPERATE

 garage door automatically or manually if    

  door is improperly balance or springs are broken.

s

 CONTACT A TRAINED DOOR SYSTEM TECHNICIAN.

     

WA R N I N G

Use of any other wall control can cause unexpected operation of 
the door and loss of lighting feature. Locate wall console within 
sight of door and far enough from door to prevent contacting it 
while operating the console. Control must be at least 5 feet above 

mOORTOPREVENTSMALLCHILDRENFROMOPERATINGIT

3'

 - 

4'

Sectional Door 

3'

 - 

4'

One-Piece Door 

Содержание CB 1000

























Отзывы: