56
5.6 LINK
Link setup defines various settings between the DVR and various devices, such as, the internet
connection, keyboard controllers, PTZ cameras, e-mails and DVR name/location settings, in order to
access and search the DVR in the CMS (Central Monitoring System).
Before using the LINK menu, please make sure the LAN cable is properly connected and the required
equipment is prepared.
1) Using a LAN Cable
Plug the LAN cable into the unit.
This enables the unit to be connected via an
Ethernet network and also enables the unit to
be viewed via the Media Viewer software.
2) Using
Mobile
Communication
Terminal
The DVR can also be accessed using a mobile communication terminal (not supplied). This enables
the user to connect to the unit while the DVR is mobile.
The Mobile Communication Terminal must be
configured before connection and have the
mobile SIM card inserted.
The Mobile Communications Terminal is
connected to the DVR via the USB port on
the front of the unit and once connected will
assign an IP address for the DVR.
For further information on how to operate
the connection with Media Viewer, please
refer to the Media Viewer Manual
“CONNECT TO MOBILE DVR FROM URL”
section.
