OPERATING INSTRUCTIONS
ON/OFF POWER SWITCH
The bandsaw is equipped with a rocker type ON/OFF switch, located at the left, that is equipped with a lock-out key.
To prevent unwanted or unauthorized start-up or usage remove the lock-out key
and store it in a safe place.
To start the bandsaw, insert the lock-out key and pull up the switch
. To stop the bandsaw, push down on the power
switch
. When the saw comes to a complete stop, remove the lock-out key
by gently pulling it outward.
POWER ON
POWER OFF
LOCK-OUT KEY
(PREVENTS START-UP WHEN REMOVED)
USING THE TABLE EXTENSION
When working with wider or longer work pieces that may need addition-
al support the table extension can be pulled out and locked in place to
provide wider work surface.
1.
Loosen the cam lock lever
at the front of the table.
2.
Pull out and slide the table extension
to the required position.
3.
Lock down the cam lock lever to secure the table extension in
place.
CUTTING CURVES
•
When cutting curves, carefully turn the workpiece so the blade follows without twisting, If the curve is so sharp that
you repeatedly back up and cut new kerf, use a narrower blade, or a blade with more set (teeth further apart).
When a blade has more set, the workpiece turns easier but the cut is rougher.
•
When changing a cut, do not withdraw the workpiece from the blade. The blade may get drawn off the wheels.
•
To change a cut, turn the workpiece and cut your way out through the waste material area.
•
When cutting long curves, make relief cuts as you go along.
14
USING THE RIP FENCE
For more precise straight line cuts there is a retractable rip fence attach-
ment on the end of the table extension.
1.
Loosen the 2 lock knobs
on the end of the extension table.
2.
Raise the rip fence and while holding it in place above the table, re-
tighten the 2 lock knobs.
3.
Adjust the positioning of the table extension so that the distance
from the inside face of the rip fence to the blade matches the
required width of cut. Make sure to lock the table extension in place
before starting to cut against the rip fence.
Содержание 90-050
Страница 18: ...90 050 18...
Страница 23: ...NOTES 23...