General Monitors S216A, Инструкция по эксплуатации

Страница: 37 / 39

Engineering Documentation (
continued
)
5.2.2 Termination Drawing
CE Mark Units
5.3 Or der ing In for ma tion
S216A - 3 2
0
-
0 00
-
0 0 0
The Standard Configuration for the Model
S216A is:
S216A - 3 2 1 - 1 0 1 - 1 2 1
32
Appendix General Monitors
l
Calibration Signal:
1 = 1.5mA Calibration Signal
(standard)
2 = 0.0mA Calibration Signal
l
Reset Switch:
1 = No Reset Switch CSA, FM
2 = With Reset Switch CSA, FM
(standard)
l
Meter Scale:
1 = 0 to 99ppm Scale
(standard)
2 = 0 to 50ppm Scale
l
Hydrogen Sulfide Sensor:
0 = No Sensor
1 = 50445-1, Aluminum Body, 100ppm
(standard)
2 = 50445-5, Aluminum Body, 50ppm
3 = 50445-9, Aluminum Body, 20ppm
4 = 50448-1, Stainless Steel Body, 100ppm
5 = 50448-5, Stainless Steel Body, 50ppm
6 = 50448-9, Stainless Steel Body, 20ppm
7 = 50454-1, PTB, Aluminum Body, 100ppm
8 = 50454-5, PTB, Aluminum Body, 50ppm
9 = 50454-9, PTB, Aluminum Body, 20ppm
10 = 50457-1, PTB, Stainless Steel Body, 100ppm
11 = 50457-5, PTB, Stainless Steel Body, 50ppm
12 = 50457-9, PTB, Stainless Steel Body, 20ppm
l
Active Channels:
0 = Controller Only
1 = One Active Channel
l
Relay State:
1 = Latch Alarm / Non-Latch Warn DE
(standard)
2 = Latch Alarm / Non-Latch Warn Energized
3 = Latch Alarm / Latch Warn De-Energized
4 = Latch Alarm / Latch Warn Energized
5 = Non-Latch Alarm / Non-Latch Warn De-
Energized
6 = Non-Latch Alarm / Non-Latch Warn
Energized
7 = Non-Latch Alarm / Latch Warn De-Energized
8 = Non-Latch Alarm / Latch Warn Energized