General DataComm SpectraComm 800 T3, Руководство по установке и эксплуатации

Страница: 15 / 62

076R160-000 SpectraComm 800 T3 Data Service Unit 2-1
Issue 4 Installation and Operation Manual
Chapter 2:
Installation and Setup
Installation Overview
This chapter describes the installation of the SC800 T3 DSU in a SpectraComm shelf or enclosure.
The DSU should be installed in a ventilated area where the ambient temperature does not exceed
the environmental specifications listed in
Table 1-3 . Do not install the DSU above other equipment
that generates large amounts of heat (e.g., power supplies).
Unpacking Instructions
The SC800 T3 unit is shipped in shock-absorbent packing within a corrugated box and is pre-
assembled, tested and ready for use. Some components will not be required/supplied for your
network installation. Remove each component from the box and perform a thorough inspection. If
any component appears damaged, contact the shipper immediately. All damaged components must
be retained until an inspection by the shipper has been completed. If it is necessary to re-package
and return the unit, use the original box and packing material.
Table 2-1 lists the standard and optional equipment.Part numbers use -XXX to designate cable
length in feet. Table 2-2 lists the compatible shelf systems.
Note
When the DSU is installed in a SC 5000 shelf with a co-located SCM, all network and interface connections
are made at the SC800 T3 front panel.
Table 2-1 Equipment Checklist
Item Description Part Number
SC800 T3 DSU T3 Subrate Data Service Unit 076P015-001
Cables & Adapters HSSI Cable, male/male angled 75° 027H625-0xx
Network Interface Cable, 75-ohm BNC transmit/receive 026H004-xxx
10Base-2 Cable (SCM to LAN) in 5-meter length.
Also 15 meter (S-125H004-001) and 30 meter (S-125H005-001). S-125H003-001
RJ45 Cable (SCM front panel CTRL port to SNMP network
manager or VT100-compatible terminal 830-128-8xx
Cable Tray (routes front panel cables to the rear of the rack) 010B224-001
Adapter - 10Base-T, twisted pair (SCM to LAN) 029H209-001
Adapter - 10Base-2, coaxial cable (SCM to LAN 058B033-001
Terminal Adapter, IBMPC-RS561 DB9F/RJ45 029H211-001
Terminal Adapter, RS232-RS561 DB25M 029H210-001
Terminal Adapter, DB9 to DB25 209-036-015