manualshive.com logo in svg

Generac Power Systems 0065510, Руководство пользователя

Поделиться
Скачать
Generac Power Systems 0065510 Скачать руководство пользователя страница 9

Safety Information

Owner’s Manual for 60 Hz Air-Cooled Generators

5

Battery Hazards

Always recycle batteries in accordance with local laws
and regulations. Contact your local solid waste collection
site or recycling facility to obtain information on local
recycling processes. For more information on battery
recycling, visit the Battery Council International website
at: 

http://batterycouncil.org

(000188)

DANGER

Electrocution. Do not wear jewelry while 
working on this equipment. Doing so will 
result in death or serious injury.

(000162)

WARNING

Explosion. Do not dispose of batteries in a fire. Batteries 
are explosive. Electrolyte solution can cause burns and 

blindness. If electrolyte contacts skin or eyes, flush with water 
and seek immediate medical attention.

(000137a)

WARNING

Explosion. Batteries emit explosive gases while charging. 
Keep fire and spark away. Wear protective gear when 
working with batteries. Failure to do so could result in 
death or serious injury. 

 

(000164)

WARNING

Electrical shock. Disconnect battery ground
terminal before working on battery or battery
wires. Failure to do so could result in death 
or serious injury.

(000138a)

WARNING

(000163a)

WARNING

Risk of burn. Do not open or mutilate batteries. 
Batteries contain electrolyte solution which can 
cause burns and blindness. If electrolyte contacts
skin or eyes, flush with water and seek immediate
medical attention.

WARNING

Environmental Hazard. Always recycle batteries at an 
official recycling center in accordance with all local 
laws and regulations. Failure to do so could result in
environmental damage, death or serious injury.

(000228)

Содержание 0065510













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды