manualshive.com logo in svg

Generac Power Systems 0065510, Руководство пользователя

Поделиться
Скачать
Generac Power Systems 0065510 Скачать руководство пользователя страница 16

General Information

12

Owner’s Manual for 60 Hz Air-Cooled Generators

Activating the Generator

The generator should be activated upon initial start-up.
See the installation manual for complete instructions.

Wi-Fi Module

The generator is equipped with a Wi-Fi module. Refer to
the Wi-Fi module owner’s manual for further instruction.

Replacement Parts

Accessories

NOTE: 

Performance enhancing accessories are available for air-cooled generators. Contact an IASD or visit

www.generac.com

 for additional information on replacement parts, accessories, and extended warranties. See also

http://www.ordertree.com/generac/air-cooled-homestandby-generators/

.

Description

9 kW

11 kW

16 kW

20 kW

22 kW

26R Exide Battery

0H3421S

Spark Plug

0G0767B
(RC12YC 

or equivalent)

0E9368

(RL87YC

or equivalent)

0G0767A

(RC12YC or equivalent)

Oil Filter

070185E

Air Filter

0E9371A

0J8478

Control Panel Fuse

0D7178T

Transfer Switch Fuses

Refer to Transfer Switch Manual for part number

Accessory Description

Cold Weather Accessories*—

•

Battery Pad Warmer

•

Oil Warmer

•

Breather Warmer

 * each sold separately

•

Recommended in areas where temperatures fall below 0 °F (-18 °C).

      

     (Not necessary for use with AGM-style batteries)

•

Recommended in areas where temperatures fall below 0 °F (-18 °C).

•

Recommended in areas where heavy icing occurs.

Scheduled Maintenance Kit 

Includes all pieces necessary to perform maintenance on the generator along with oil 
recommendations.

Fascia Base Wrap 

The fascia base wrap snaps together around the bottom of the new air-cooled generators. This 
offers a sleek, contoured appearance as well as protection from rodents and insects by covering 
the lifting holes located in the base. Requires use of the mounting pad shipped with the generator.

Mobile Link™ Cellular Enabled 
Accessory (USA only)

Provides a personalized web portal displaying generator status, maintenance schedule, event 
history, and much more. This portal is accessible via computer, tablet, or smart phone. Sends 
emails and/or text notifications the moment there is any change in the generator’s status. 
Notification settings can be customized to what type of alert is sent and how often. Visit 

www.MobileLinkGen.com

 for more information.

Touch-Up Paint Kit 

Very important to maintain the look and integrity of the generator enclosure. This kit includes 

touch-up paint and instructions.

Extended Warranty Coverage

Extend the generator warranty coverage by purchasing extended warranty coverage. Covers both 

parts and labor. Extended coverage can be purchased within 12 months of the end-user’s 

purchase date.

This extended coverage is applicable to registered units and end-user proof of purchase must be 

available upon request.
Available for Generac

®

 and Guardian

®

 products.

Not available for Corepower™, PowerPact™, and EcoGen™ products or all international 

purchases.

Wi-Fi LP Fuel Level Monitor

The Wi-Fi enabled LP fuel level monitor provides constant monitoring of the connected LP fuel 

tank. Monitoring the LP tank level is an important step in making sure your generator is ready to 

run during an unexpected power failure. Status alerts are available through the Mobile Link™ 

application informing you when your LP tank needs a refill.

Содержание 0065510













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды