Gemini GEM-P816 Скачать руководство пользователя | Manualshive

Страница: 58 / 60

background image

L

NAPCO Security Systems

X

GEM-P816 Installation Instructions

WI994C 3/04

!

Page 55

FCC STATEMENT

This equipment generates and uses radio-frequency energy and, if not installed and used properly, that is, in strict
accordance with the manufacturer's instructions, may cause interference to radio and television reception. It has been
type tested and found to comply with the limits for a Class-B computing device in accordance with the specifications in
Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a
residential installation.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures: reorient the receiving antenna;
relocate the computer with respect to the receiver; move the computer away from the receiver; plug the computer into a
different outlet so that computer and receiver are on different branch circuits.

If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions.
The user may find the following booklet prepared by the Federal Communications Commission helpful: "How to Identify
and Resolve Radio-TV Interference Problems". This booklet is available from the U.S. Government Printing Office,
Washington, DC 20402; Stock No. 004-000-00345-4.

CAUTION:

This equipment generates and uses radio-frequency energy. If not installed using conventional installation

practices for RF devices, it may cause interference to radio and television reception. It has been tested and found to
comply with the limits for a Class A computing device pursuant to Subpart B of Part 15 of FCC Rules, which are
designed to provide reasonable protection against such interference. However, there is no guarantee that interference
will not occur in a particular installation. If it has been found to cause interference to radio or television reception, which
can be determined by removing and reapplying AC and battery power to the equipment, the installer should try to
correct the interference by one or more of the following measures: reorient the receiving antenna; connect the power
transformer to a different outlet so that the control panel and receiver are on different branch circuits; relocate the
control panel with respect to the receiver.

«
...
56
57
58
59
60
»

Содержание GEM-P816





























































Отзывы:

Нет отзывов

Похожие инструкции для GEM-P816

Бренд: easydriver Страницы: 26

Бренд: Calsense Страницы: 10

Бренд: Bang & Olufsen Страницы: 36

Бренд: Mad Catz Страницы: 4

Бренд: Datavideo Страницы: 17

Бренд: Datamax Страницы: 22

Бренд: Lawler Страницы: 6

Бренд: Data Aire Страницы: 28

Бренд: halstrup-walcher Страницы: 39

Бренд: Harman Kardon Страницы: 25

Бренд: Uniss Страницы: 21

Бренд: Maestra Страницы: 22

Бренд: Nabco Страницы: 35

Бренд: IBM Страницы: 20

Бренд: DAV TECH Страницы: 24

Бренд: OBSIDIAN CONTROL SYSTEMS Страницы: 16

Бренд: Parker Страницы: 42

Бренд: Klimaire Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды