1.0 - PRELIMINARY ADVICE
Dear Customer, th
.
same as 933 without self-powered battery.
:
GEMINI 932:
e present manual illustrates the most fully featured alarm system; not all functions,
electrical connections etc. will therefore apply to all models.
Before installing, identify your alarm model and refer to it for the correct instructions
The following signs, intended for the installer or the user, indicate particular functions or connections
as follows
USER MANUAL - PAGE 03
For the installer.
This sign indicates that the system will work according to the connections and the
programming selected or it simply provides useful installation tips.
!
For the user.
This sign highlights useful information.
2.0 - OPERATING DESCRIPTION
Exclusion of sensors and comfort feature is only bound to each single arming
cycle.
USER MANUAL
2.1 - COMPLETE SYSTEM ARMING
2.2 - SYSTEM ARMING WITH SENSOR AND COMFORT FEATURE EXCLUSION
Press the lock button on the
).
.
.
.
!
!
vehicle original remote control; system arming is confirmed by a siren
chirp (if feature has been enabled) and a flash of the turn indicators.
The system has a 30” arming delay (indicated by the LED turned ON steady
When the system is armed, the internal volumetric protection and comfort feature can be excluded as follows:
Show the electronic key to its receptacle; the LED will give out a quick flash
Close all vehicle doors and press the lock button on the original remote control
System arming is confirmed by the standard optical/acoustic signals
!
Disarm the system and turn ignition key “OFF”.
!
2.3 - PA
When this function is programmed, the system passively arms approx. 60” after ignition switch OFF
and after the last door is opened and closed.
System activation is confirmed by the standard optical/acoustic signals.
SSIVE ARMING
If passive arming is enabled, the internal sensors and the comfort output (automatic
window roll-up) are excluded.
Opening a door 60” before the system is armed causes the procedure to interrupt; it is
resumed once the door is closed.
2.4 - ARMING DELAY
The arming delay lasts approximately 30” and is signalled by the LED turned ON steady;
.
it is possible
to exit the vehicle without triggering any alarm
