2
1. INSTALLATION & INITIAL SETUP
ENGLISH
Through ongoing Research and Development, aligned with our company vision, GEMAS continue to
offer new technology and products to users that provide easier pool usage, resulting in healthier, more
reliable pools.
Pool Control Mono fully automates the time scheduling of your pool system. Enabling users to digitally
set starting and closing times for the operation of the pump(s), light(s) and any additional group of
equipment used in the pool. Additionally, Pool Control Mono protects the pool equipment by
automatically shutting down when the ampere/current exceeds or drops below the pre-set tolerance
range. Thus, it protects the pump from harmful electrical power fluctuations.
Settings/Controls are:
6
1
2
3
4
5
12
7
8
9
10
11
1-
Pump First Timer ON
2-
Pump First Timer OFF
3-
Pump Second timer ON
4-
Pump Second timer OFF
5-
Pump is ON/OFF LED
6-
Settings Dial/Button
7-
Light Timer ON
8-
Light Timer OFF
9-
AUX Output ON
10-
AUX Output OFF
11-
Malfunction/Error LED
12-
Homepage LED
Make sure that the device is installed and connected correctly. See electric connection diagrams at
the back of this booklet. At installation, to setup the device for the first time, it is necessary to set the
main clock/time, calibrate the pump ampere/current and select the operating modes for each device
to be controlled (e.g. Continuous ON, continuous OFF or Automatic (timer controlled). If the device is
to be operated in automatic mode, device ON & OFF timers will also need to be set. Otherwise the
devices may not operate or may stop and start at undesired time.
Device Settings Program Menu Order
1. Homepage
2. Time setting section for Pump first program ON
3. Time setting section for Pump first program OFF
4. Time setting section for Pump second program ON
5. Time setting section for Pump second program OFF
6. Time adjustment section of Light output ON
7. Time adjustment section of Light output OFF
8. Time adjustment section of AUX output ON
9. Time adjustment section of AUX output OFF
10. Pump Calibration section (CAL) (shows pump ampere)
11. Device Main Time/Clock setting – main display shows (Sett)
12. (Pump.On/Pump.OFF/P.OtO)
13. (Light.On/Light.OFF/L.OtO)
14. (Aux.On/Aux.OFF/Aux.OtO)
15. Pump ampere/current tolerance setting
