10
5- Setting Automatic Startup/On and Shut down/Off times
PUMP 1
st
Startup Time:
In OFF mode, turn the Settings dial/button
CLOCKWISE until the LED for Pump 1
st
timer ON is lit green. Press the
dial/button to ENTER. The display then flashes to show the hours & minutes.
By turning the dial/button, the minutes & hours can be changed (in 5 minute
increments). Then the dial/button must be pressed again to save the Timer
ON setting.
PUMP 1
st
Shut down Time:
In OFF mode, turn the Settings dial/button
CLOCKWISE until the LED for Pump 1
st
timer OFF is lit green. Press the
dial/button to ENTER. The display then flashes to show the hours & minutes.
By turning the dial/button, the minutes & hours can be changed (in 5 minute
increments). Then the dial/button must be pressed again to save the Timer
OFF setting.
PUMP 2
nd
Startup Time:
In OFF mode, turn the Settings dial/button
CLOCKWISE until the LED for Pump 2
nd
timer ON is lit green. Press the
dial/button to ENTER. The display then flashes to show the hours & minutes.
By turning the dial/button, the minutes & hours can be changed (in 5 minute
increments). Then the dial/button must be pressed again to save the Timer
ON setting.
PUMP 2
nd
Shut down Time:
In OFF mode, turn the Settings dial/button
CLOCKWISE until the LED for Pump 2
nd
timer OFF is lit green. Press the
dial/button to ENTER. The display then flashes to show the hours & minutes.
By turning the dial/button, the minutes & hours can be changed (in 5 minute
increments). Then the dial/button must be pressed again to save the Timer
OFF setting.
LIGHTS ON Time:
In OFF mode, turn the Settings dial/button CLOCKWISE
until the LED for Lights timer ON is lit green. Press the dial/button to ENTER.
The display then flashes to show the hours & minutes. By turning the dial/button,
the minutes & hours can be changed (in 5 minute increments). Then the
dial/button must be pressed again to save the Timer ON setting.
LIGHTS OFF Time:
In OFF mode, turn the Settings dial/button CLOCKWISE
until the LED for Lights timer OFF is lit green. Press the dial/button to ENTER.
The display then flashes to show the hours & minutes. By turning the dial/button,
the minutes & hours can be changed (in 5 minute increments). Then the
dial/button must be pressed again to save the Timer OFF setting.
AUX ON Time:
In OFF mode, turn the Settings dial/button CLOCKWISE until
the LED for AUX timer ON is lit green. Press the dial/button to ENTER. The
display then flashes to show the hours & minutes. By turning the dial/button,
the minutes & hours can be changed (in 5 minute increments). Then the
dial/button must be pressed again to save the Timer ON setting.
AUX OFF Time:
In OFF mode, turn the Settings dial/button CLOCKWISE
until the LED for AUX timer OFF is lit green. Press the dial/button to ENTER.
The display then flashes to show the hours & minutes. By turning the dial/button,
the minutes & hours can be changed (in 5 minute increments). Then the
dial/button must be pressed again to save the Timer OFF setting.
6- Pump Overload / Underload Tolerance (Pr.18) - (Menu item 15)
Overload / Underload tolerance is set to ±18% of the calibrated ampere. This
value has been Preset by the Factory. Unless necessary, this value should
not be changed.
