GEISMAR MP.12, Руководство пользователя

Страница: 8 / 78

P a g e
|
6
Réf. : 450100 FR
CHAPTER 1 - Safety
1.1 - Foreword
You will find below a set of rules,
observance of which will guarantee the
safety of people and goods as part of
machine operation.
As failure to observe these rules could have
serious (injuries, etc.) or even fatal
consequences, we draw your attention to
the fact that all people concerned by the
use, servicing, storage or possession of the
machine described in this handbook must
familiarise themselves with these rules.
Users causing an accident due to failure to
observe these rules run the risk of being
held responsible for the accident.
1.2 – Safety and general usage instructions
You must possess the necessary training, skills
and tools to use, service and repair the equipment
correctly.
Prior to using the equipment, including in
maintenance, you must familiarise yourself
with the instruction handbook, its
attachments and the safety requirements
prevailing on the workplace.
You must strictly comply with the site
general safety instructions, laid down by the
site supervisor, particularly if work is
conducted without interruption of traffic
.
Use, servicing and repair of equipment must
be carried out by competent personnel
having
received thorough training
beforehand. While the technical
documentation and instructions will usefully
complete knowledge acquired during
training sessions, on no account can they
replace theoretical and practical skills
training provided according to the state-of-
the-art rules.
Should the company feel unable to provide its
personnel with such training, as is its duty,
GEISMAR Alpes remains at its disposal to provide
advice concerning the necessary training
programme.
Training must cover explanations of the various
functions of the equipment, the instructions for
use and servicing and the safety rules to be
observed, as well as the hands-on exercises.
All machine users must conform to
applicable work regulations.
GEISMAR Alpes cannot be held
responsible for modifications made
without its written consent or for non-
conform assemblies, particularly if original
manufacturer parts are not used.