GEISMAR MP.12, Руководство пользователя

Страница: 32 / 78

P a g e
|
30
Réf. : 450100 FR
CHAPTER 4 – Using the machine
4.1 – Starting and stopping
■ Starting
- Open the fuel valve Item .
- Place the starter pull cord Item on the closing position (if necessary, do not
use the starter when the engine is hot or when atmospheric temperature is
high) and adjust the engine speed to the slowest speed.
- Start the engine:
-
Gently pull on the automatic starter until the compression point is
reached
-
Give a brisk tug to start the engine
-
Repeat if necessary
- Let the engine idle for a few moments until speed stabilises and engine
temperature rises.
- When the engine starts to heat, gradually bring the starter pull cord to the
opening position.
- Once the engine is hot, increase speed up to the maximum limit stop Item
(factory setting).
■ Stopping the machine
Stop the engine by closing the fuel valve Item (STOP position).
The machine must only be started once it is on the track
The wheel must be retracted inside its protective guard once
grinding is complete. This precaution prevents operators from
accidentally coming into contact with a moving wheel and also
avoids destruction of the wheel or flying stones in the event of
incorrect operation.
1
2
3