Gehl SL3635, Руководство оператора

Страница: 56 / 82

The tread bar of all tires must face the same direction.
Mounting Tires
Inflating or servicing tires can be dangerous. When
possible, trained personnel should service and mount tires. To avoid
possible death or serious injury, follow the safety precautions below:
1.
Be sure the rim is clean and free of rust.
2. Lubricate the tire beads and rim flanges with a soap solution. Do not use
oil or grease.
3. Use a clip-on tire chuck with remote hose and gauge, allowing you to
stand clear while inflating the tire. Do not place your fingers on the tire
bead or rim during inflation.
4.
Never inflate beyond 35 PSI (240 kPa) to seat the beads. If the beads have
not seated by the time the pressure reaches 35 PSI, deflate the assembly,
reposition the tire on the rim, lubricate both parts and re-inflate. Inflation
pressure beyond 35 PSI with unseated beads may break the bead or rim
with explosive force sufficient to cause death or serious injury.
5. After seating the beads, adjust the inflation pressure to the recommended
operating pressure.
6. Do not weld, braze or otherwise attempt to repair and use a damaged rim.
Check Tire Pressure
Tire Size
Inflation Pressure
PSI kPa
10 x 16.5 8-ply Heavy Duty Flotation 60 414
27 x 8.5 -15 8-ply Heavy Duty 60 414
27 x 10.5 - 15 8-ply Heavy Duty 60 414
6.5 x 16 - 5.50 Solid Rubber - -
Correct tire pressure should be maintained for all tires to enhance operating
stability and extend tire life. Refer to the above chart for the proper inflation
pressure.
When installing tires, be sure they are the same size and style on each side of
the loader. Always replace tires with the same size as the original equipment.
53 908268/BP0904
WARNING