Gehl SL3635, Руководство оператора

Страница: 42 / 82

Leveling the Ground
Drive the loader to the far edge of the area
to be leveled. Tilt the bucket forward to
place the bucket cutting edge at a 30 to 45
degree angle to the surface being leveled.
Then place the lift arm into the “float”
position and drive the loader rearward
dragging the dirt and, at the same time,
leveling it.
Note:
The float (detent) position for T-Bar
controlled loaders is reached by pushing the
right handle all the way forward. For
hand/foot controlled loaders, use your toes
to push the front of the left pedal all the way
down.
Check that the work area is clear of people and
obstacles. Always look in the direction of travel.
Highway Travel
If it becomes necessary to move the loader a long distance, obtain and use a
properly rated trailer. For short distance highway travel, attach an SMV
(Slow Moving Vehicle) emblem (purchased locally) to the back of the loader.
For highway operation, obtain and install dual amber flashers or a strobe
light. Check state and local laws and regulations.
Lifting the Loader
The loader can be lifted using a four-point lift kit, which is available from
your authorized Gehl dealer.
Storing the Loader
If your skid loader is to be stored for a long period of time, the following
procedure is suggested:
1. Fully inflate the tires.
2.
Lubricate all grease zerks.
3. Check all fluid levels and replenish as necessary.
4.
Add stabilizer to the fuel per the fuel supplier’s recommendations.
5. Remove the battery, charge fully and store in a cool, dry location.
6.
Protect against extreme weather conditions such as moisture, sunlight
and temperature.
39 908268/BP0904
Fig. 21: Leveling the Ground
WARNING