Gehl SL3635, Руководство оператора

Страница: 39 / 82

Connect Auxiliary Hydraulic Couplings
Note:
With the engine
OFF
, key in the
ON
position and the restraint bar down, the
auxiliary hydraulic control can be moved to relieve any pressure in the hydraulic
system.
Coupler hookup is located on the left lift arm. “A” port is pressure, “B” port is
return when the auxiliary control is in the detent position.
Remove Attachment
1. Tilt the hitch back until the attachment is off the ground.
2.
Exercise the
MANDATORY SAFETY SHUTDOWN PROCEDURE
(page 7).
3. Relieve any hydraulic pressure in the auxiliary and attachment lines.
a.
Turn the key
ON
(do not start the engine).
b. With the restraint bar down, move the auxiliary hydraulic control
back and forth. This will relieve the pressure in the hydraulic system.
4. With the engine
OFF
, leave the operator’s compartment, disconnect the
auxiliary hydraulic hoses and rotate the hitch’s latch levers completely
vertical to fully retract the latch pins.
5.
Start the engine and be sure that the lift arm is fully lowered and in contact
with the loader frame.
6.
Tilt the hitch forward and slowly back the loader until the attachment is
free from the loader.
Self-Leveling (optional)
The feature is designed to keep the attachment level while the lift arm is being
raised.
908268/BP0904 36