Gehl SL3635, Руководство оператора

Страница: 25 / 82

9. Hydraulic Oil Temperature -
Lights if the hydraulic oil becomes too
hot, warning the operator to stop engine. Allow the hydraulic system to
cool and determine the cause of the high temperature. During normal
operation, this indicator should be
OFF.
10. Keyswitch - In a clockwise rotation, these positions are:
Off Position -
With the key vertical (
OFF
) in the keyswitch, power from
the battery is disconnected to the controls and instrument panel electrical
circuits. This is the only position the key can be inserted or removed from
the keyswitch.
On or Run Position - With the key turned one position clockwise (
RUN
)
from the vertical (
OFF
) position, power from the battery is supplied to all
control and instrument panel electrical circuits.
Start Position - With the key turned fully clockwise (
START
) and held in
position, the electric starter energizes, starting the engine. Release the key
after the engine starts (it returns to the
RUN
position by itself).
Note:
The engine cannot be started unless the operator sits in the seat and the
restraint bar is lowered.
11. Parking Brake Switch -
Used to manually apply the parking brake. The
red indicator on the switch lights when the parking brake is applied.
12. Preheat Switch - Used to preheat the engine in cold conditions.
13. Light Switch -
Controls all the lights (standard and optional) on the
loader. Symbols denote the three positions of the light switch. In a
clockwise direction these are: Off, Flashers (Hazards) and Worklights
with Flashers. For the lights to function, the keyswitch must be in the
RUN
position.
14. Circuit Breakers -
Four circuit breakers on the instrument panel protect
the loader’s electrical circuits.
Important:
Do not attempt to defeat the circuit protection by jumping
across a circuit breaker or by using a higher amperage circuit breaker.
908268/BP0904 22