Y Series TechBook
7
The following material
is recommended:
4- # 10 screws of
appropriate length with
round, truss or
pan head
4- washers 1/2" OD x
1/16" thickness (12 mm
OD x15 mm)
Select the most appropria-
te location on the floor for
spa pack and firmly attach
guide plate to wooden
base with 2 screws backed
by 2 washers
in.k200 dimensions:
2"
(51 mm)
475"
(120 mm)
17"
(43 mm)
Now firmly attach unit to
wooden base by using
the remaining 2 screws
backed by 2 washers to
attach the front feet
Features:
LED display
4 keys
8 light indicator
inlink connector
Mechanical Specs:
Weight:
09 lbs (041 kg)
Dimensions (W x H x D):
Front panel: 475" x 2" x 17"
(120 mm x 51 mm x 43 mm)
Soft gasket
Approvals:
UV resistance (ASMTD4329)
UL, CSA, TUV and CE
Note:
The spa pack must be
installed at least 4" (52 mm)
above potential flood level.
If floor is on ground level,
pack should be raised at least
4" (52 mm).
Slide back side of the
unit's feet into the guide
plate It should easily slide
into place
4"
Floor installation procedure with optional guide plate
Y Series installation
Warning!
Beware the application of some products
commonly used against corrosion (such as
WD-40 family products) as they could damage
the power box, due to a negative chemical
reaction between some industrial oils and its
plastic enclosure Any other materials which may
come in contact with the enclosure must be
carefully evaluated under end use conditions for
compatibility
Important!
Please note that
countersunk screws
should not be used as
they can damage the
power box support
