IST-1408.PA01.02 - Dis.0534045
CE408P / User Manual
Pag. 30/41
GECA S.r.l. - Via E. Fermi, 98 25064 GUSSAGO (BS) - Tel. 030 3730218 - Fax 030 3730228
•
INFO:
Displays for 5 seconds, the information about the central unit:
model, firmware version, and contacts for service. ---------------
BUZZER (Level 1)
: you can handle activate the internal buzzer, if there
is a fault or alarm of a sensor, or a zone, press
ENTER
on this item, then
using
and
key, you can choose which item to edit.
•
ALARMS:
When set to
YES
, the internal buzzer will be activated if a
sensor or a zone goes into Alarm condition.
•
FAULTS:
When set to
YES
, the internal buzzer will be activated if a
sensor or a zone goes into fault condition.
Press
ENTER
and using
and
key, to modify these parameters ---
After choosing the desired value, pressing
ENTER
the confirmation window
will appear. Then press
ENTER
to confirm or to go back, press
ESC
.
A window will prompt you that the operation was successful. Then the
screen returns the beginning of manage Settings.
DATE and TIME (Level 1)
: To change the date and time, press
ENTER
on its item. With
and
values can be modify, using
and
you can go from one value to another. -------------------------------------------
Then move on the
SAVE
and press
ENTER
. Confirmation window will
appear. In case you want to go back, press
ESC
or press
ENTER
to
confirm.
The window will inform you that the operation was successful.
Then the screen returns the beginning of manage Settings.
If it had been inserted, an incorrect date (i.e.: 30/02 / ....) window will
warn you of the error. -----------------------------------------------------------------
Then the screen returns the beginning of manage Date and Time.
The central unit has an internal battery that powers the clock when the unit is turned off. If
date and time are required on power, the backup battery may be discharge and / or faulty,
please contact our customer service for replacement.
ACCESS MENU
In this sub menu, you can manage the passwords, for access to the
protected menus. ----------------------------------------------------------------------
EN./DIS. LEV.1/2/3
: This item allows you to enable or disable the
relative access level.
Press
ENTER
on its item, then with
and
key, you can enable or
disable the access level, by pressing
ENTER
on the desired item.------------
By performing the disabled, are disabled also all higher levels (eg
disabling level 1, are disabled, the levels 2 and 3).
Then will appear the confirmation window. Press again
ENTER
to confirm,
or to go back, press
ESC
.
A window notifies you that the operation has been successful. ------------
CE408
Ver.
1.00
GECA srl
Via E. Fermi 98
25064 Gussago (BS)
ITALY
Tel +39 030 3730218
[email protected]
BUZZER
ALLARMS:
NO
FAULTS: NO
TIME
10
: 15
DATE
22 / 01 / 2014
SAVE
SAVE
DATE
NOT VALID
ACCESS MENU
1 EN./DIS. LEV.1
2 MOD. PAS. LEV 1
3 EN./DIS. LEV.2
4 MOD. PAS. LEV 2
5 EN./DIS. LEV.3
6 MOD. PAS. LEV 3
EN./DIS. LEV. 1
1 ENABLE LEVEL 1
2 DIS. LEVEL 1-3
EN./DIS. LEV. 1
LEVEL 1
ENABLED
