IST-1408.PA01.02 - Dis.0534045
CE408P / User Manual
Pag. 29/41
GECA S.r.l. - Via E. Fermi, 98 25064 GUSSAGO (BS) - Tel. 030 3730218 - Fax 030 3730228
Example
: in the screen, on the left.
The
first line
indicates that you are seeing the events of 20 January
2014. ----------------------------------------------------------------------------------
The
second line
indicates that, at 15 hours, 12 minutes and 3 seconds
(15:12:03) the sensor no.2 (S 02) exceeded the 1
st
alarm threshold
(AL1).
The
third line
indicates that at 14 hours, 45 minutes and 21 seconds
(14:45:21), the output relay no.5 (U 05) has been activated (ACT.).
The
fourth line
indicates that at 10 hours, 38 minutes and 57 seconds
(10:38:57) the Logic Input no.1 (I 01) has been deactivated (DEA).
In the
other rows
, there are no events.
ALL
: are the all events, stored in the unit, sorted from newest to oldest, faults and alarms (
sensors,
inputs, outputs and related zones
) and generic (
presence or absence of mains power, control panel
power on, and the reset
).
To access this viewing, press
ENTER
on the relevant item. Using
and
you can scroll through
the events, which are displayed and sorted in the same way described above for the submenu
ALARM / FAULT
.
In addition to the above matters are those of the generic event that, after the hour, they can show the
following details:
•
POWER ON:
Indicates that the control panel has been switched on.
•
MAIN YES:
Indicates that the unit is powered from the mains (
if the batteries are installed
).
•
MAIN NOT:
Indicates that the unit is powered by batteries (
only if batteries are installed
).
•
RESET:
Indicates that has been executed, the Reset command.
SETTINGS
In this sub menu, you can manage some settings of the unit. --------------
LANGUAGE (Level 1)
: To change the language of the unit, press
ENTER
on the relevant item.
Using
and
choosing from the list, the one you want, then press
ENTER
will appear the confirmation window. ---------------------------------------
Press again
ENTER
to confirm, or to go back, press
ESC
.
A window notifies you that the operation has been successful. ------------
Then the screen returns to the beginning of the Settings management.
GENERALS
: Pressing
ENTER
on this item, you can edit or view other
settings of the control panel. Using
and
you choose which item
change or view.
•
CONTRAST:
Adjusts the display contrast. Press
ENTER
and and then
adjust the value using
and
key. ---------------------------------------
Reached the desired value, press
ENTER
the confirmation window will
appear. If you wish to go back, press
ESC
otherwise press
ENTER
again to confirm. A window will prompt
you that the operation was successful. Then the screen returns the beginning of manage Settings.
EVENTS 20/01/14
15:12:03
S 02 AL1
14:45:21
U 05 ACT.
10:38:57
I 01 DEA.
NO EVENT
NO EVENT
NO EVENT
NO EVENT
SETTINGS
1 LANGUAGE
2 GENERALS
3 BUZZER
4 DATEandTIME
LANGUAGE
1 ITALIAN
2 ENGLISH
3 FRENCH
LANGUAGE
SETTINGS
SAVED
GENERALS
1 CONTRAST
15
2 INFO
