The shower toilet can be used as a normal toilet even in the event of a malfunction.
The spray arm must be fully retracted. You start the toilet flush as usual by pressing
the buttons on the cistern.
If the device is defective, switch it off using the power switch.
Step
Description of problem
Fault clearance
1
The shower toilet and the status
LED are without function.
▶ Switch the device off and on again.
→ See Switching the device on and off
Result
✓ The device re-initialises.
2
The fuse or residual-current device
in the electrical distributor trips
once.
▶ Replace or reset the fuse in the electrical
distributor.
▶ Reset the residual-current device in the
electrical distributor.
Result
✓ The device initialises again after switching
on. Using the device does not trip any
fuses or residual-current devices.
3
The fuse or residual-current device
in the electrical distributor trips
repeatedly when the device is used.
▶ Disconnect the mains plug (if available).
▶ Replace or reset the fuse or residual-
current device in the electrical distributor.
▶ Contact customer service.
Result
✓ The device is defective.
4
The product has an unknown
technical defect.
▶ Trip the fuse or residual-current device in
the electrical distributor.
▶ Disconnect the mains plug (if available).
▶ Contact customer service.
▶ Have the power supply tested by a skilled
person.
40
162129590266710283 © 03-2021
968.681.00.0(04)
Содержание aquaclean sela
Страница 1: ...GEBERIT AQUACLEAN SELA USER MANUAL...
Страница 2: ......