Other functional errors
The following table will help you with troubleshooting if individual functions of the shower toilet
have failed.
The shower toilet can be used as a normal toilet even in the event of a malfunction.
The spray arm must be fully retracted. You start the toilet flush as usual by pressing
the buttons on the cistern.
If the device is defective, switch it off using the power switch.
Description of problem
Cause
Fault clearance
The status LED flashes
red.
Malfunction described
in error message has
occurred
▶ Note the number of the error
message on the display of the remote
control and inform customer service.
The spray arm is not
functioning correctly.
Malfunction has
occurred
▶ Switch off the shower toilet at the
power switch for 30 seconds.
▶ Switch on the shower toilet at the
power switch.
Result
✓ The device initialises again after
switching on.
The cleaning effect of the
shower has weakened.
Spray nozzles
clogged or defective
▶ Clean or replace the spray nozzles.
▶ → See "Descaling the device",
page 36.
When using the shower
function, the shower toilet
no longer reaches the
usual temperature.
Shower toilet dirty
▶ → See "Descaling the device",
page 36.
▶ Switch off the shower toilet at the
power switch for 30 seconds.
Result
✓ The device initialises again after
switching on.
162129590266710283 © 03-2021
968.681.00.0(04)
41
Содержание aquaclean sela
Страница 1: ...GEBERIT AQUACLEAN SELA USER MANUAL...
Страница 2: ......