Descaling the device
Information on descaling:
• During the descaling procedure, you can
continue to use the device without the
shower toilet functions.
• The descaling procedure lasts up to
40 minutes. During this time, the
orientation light flashes orange and you
can see the descaling status on the
display/smartphone. As soon as the light
stops flashing, the spray functionality is
ready for operation again.
ATTENTION
Aggressive descaling agents
Unsuitable descaling agents may cause
damage to the device.
▶
Only use Geberit AquaClean descaling
agents to descale the device.
▶
Refer to the “Descaling the device”
section.
The descaling procedure should not
be cancelled after filling the
descaling agent because it would
otherwise be flushed away unused.
The display shows
[Device is flushing…].
Prerequisite
–
The status LED on the orientation light
flashes blue-red.
–
At the touch of a button, the display on
the rear of the remote control shows
[Descale device now] or
[Descale device now, device blocked].
–
The spray arm must be fully retracted.
–
The WC lid is closed.
1
Open the design cover.
2
Remove the plug.
3
Launch the [Care and maintenance]
main menu using the buttons on the
rear side of the remote control.
Care and maintenance
4
Use the <down> arrow key to select
the [Descale device now?] menu
item.
Descale device now?
no
yes
36
162129590266710283 © 03-2021
968.681.00.0(04)
Содержание aquaclean sela
Страница 1: ...GEBERIT AQUACLEAN SELA USER MANUAL...
Страница 2: ......