Gear4music VISION KEY-30, Руководство пользователя

Страница: 26 / 48

26
FUNCTION MENU
To enter the Function menu, press the [FUNCTION]
button repeatedly to scroll through the available
menu options. The selected function will be shown
on the display. Use the data dial or [-/NO] and
[+/YES] buttons to change the parameters, as
detailed in the table below:
FUNCTION MENU
NO. Content LCD display Range Default
1 Tune xxx Tune -50 ~ +50 000
2 Key Split xxx KeySplit 1~61 019
3 Beat Type xxx BeatType 0, 2 ~ 9 004
4 Metronome Volume xxx MetroVol 0~127 80
5 Pedal Type xxx Pedal xxxx Sustain, Soft, St/Stop, Memory Sustain
6 EQ Type xxx EQ xxx Pop, Rock, Class, Jazz, Dance, Reset Reset
7 Reverb Type xxx Rev xxxxx Room1, Room2, Room3, Hall1, Hall2, Hall3,Church1, Church2, Delay,
PanDelay RevHall1
8 Reverb Level xxx ReverbVol 0 ~ 127 70
9 Chorus Type xxx Chr xxxxx Chorus1, Chorus2, GM Chorus1, GM Chorus2, Flanger1,Flanger2,
Rotary1, Rotary2 GMChorus2
10 Chorus Level xxx ChorusVol 0 ~ 127 0
11 Harmony Types xxx Hrm xxxxx Duet, StandardTrio, Full Chord, Rock Duet, Country Duet, Country
Trio, Block, 4 Close 1, 4 Close 2, 4 Open, 1+5, Octave1, Octave2,
Strum, Echo1, Echo2, Echo3, Echo4, Tremolo1, Tremolo2, Tremolo3,
Tremolo4,Trill1, Trill2, Trill3, Trill4 HrmDuet
12 MIDI Receive xxx Midi In 1 ~ 16, ALL ALL
13 MIDI Transmit xxx Midi Out 1 ~ 16 001
14 Auto Power Off xxx PowerOff OFF, 30, 60 030
15 Performance Beat xxx Perform Beat 4-4, 3-4, 2-4, 6-8 4-4
Pressing the [-/NO] and [+/YES] buttons
simultaneously will reset the parameter type value
to its default setting.
The Function menu will automatically exit if left idle
for more than 5 seconds.